SIZE & PLACEMENT: Completely covers space between front seats. Net is 49" W x 35" H without 9" Curve (49" W x 44" H with Curve extension) Adjustable height and width using additional grommets. OPTIONAL CURVED TOP: You can choose to have the curve raised or let it hang down
OVERHEAD HANDLES: Normally the best area to secure top corners. Thread cord through the handle, one hook in the corner grommet; second hook wraps onto itself … should be loose. Move to the other side and repeat. Increase tension if necessary by putting both hooks in the grommet.
SIDE (Pillar) HANDLES: Found on many SUV’s & Mini-Vans. Same as above. If you need more tension, try stretching one of the hooks over to the vertical metal bar of your headrest. ii. NOTE: Curved top (with side handle install) may not have enough tension to stay upright. Try removing the ball bungee from the grommet and wrapping it around the fiberglass rod above the grommet and then stretching around the headrest.
BOTTOM CORNERS - can be secured to the seat belt housing by the floor (wrap the bungee), or hooked or wrapped around the front seat frame near the floor.
MATERIAL: Flexible heavy-duty nylon is claw-resistant | WASHING: Hand Wash & Hang to Dry. TOOLS: None Required NOTE: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order
Completely covers space between front seats. Net is 49" W x 35" H without 9" Curve (49" W x 44" H with Curve extension) Adjustable height and width using additional grommets. You can choose to have the curve raised or let it hang down. Normally the best area to secure top corners. Thread cord through the handle, one hook in the corner grommet; second hook wraps onto itself … should be loose. Move to the other side and repeat. Increase tension if necessary by putting both hooks in the grommet.Found on many SUV’s & Mini-Vans. Same as above. If you need more tension, try stretching one of the hooks over to the vertical metal bar of your headrest.Curved top (with side handle install) may not have enough tension to stay upright. Try removing the ball bungee from the grommet and wrapping it around the fiberglass rod above the grommet and then stretching around the headrest.
